Flashforge PETG Natural 1.75mm 1kg
Flashforge PETG Natural 1.75mm 1kg
- Diameter: 1.75 mm ($pm$0.02 mm-0.03 mm)
- Print Temperature: 220°C – 270°C (typically 230-250°C)
- Bed Temperature: 60°C – 90°C (80°C recommended)
- Speed: Optimized for high-speed, 60–90mm/s (standard) up to 600mm/s (HS variant)
- Variants: Standard PETG, PETG Pro (higher strength), PETG-CF (Carbon Fiber)
- Properties: High impact resistance, hydrophobic (low moisture absorption), good chemical resistance
- Storage: Keep in a dry environment (sealed with desiccant), as PETG can absorb moisture over time
Best Use Cases
- Functional prototypes requiring durability.
- Parts needing moderate heat resistance (up to ~75°C for CF version, ~64°C for standard).
- Clear or semi-transparent items (lampshades).
- Outdoor applications.
Tips for Success
- Oozing/Stringing: PETG is prone to stringing. Reduce speed for better quality and ensure proper retraction settings.
- Bed Adhesion: Works well on PEI sheets or glass, but may require a glue stick to prevent over-adhesion on some surfaces.
- Printing: For Flashforge printers, use the pre-configured settings in FlashPrint.
- Drying: If the filament is popping or producing poor quality, dry it at 70°C for 5 hours.
